If you’ve checked your heat pump recently and noticed the pressure is lower or higher than usual, you might be wondering whether there’s a problem.
Water pressure is an important part of your heating system. If it’s too low, too high or constantly changing, it can affect how your heat pump operates and, in some cases, leave you without heating or hot water.
But what pressure should your heat pump actually be at? And when is it time to call an engineer?
At Mutha Cuva, we speak to homeowners regularly who are concerned about their system pressure. Here’s what you need to know.
What pressure should my heat pump be?
Most domestic sealed heating systems operate at around 1–1.5 bar when the system is cold. However, the correct pressure can vary depending on your heat pump, system design and manufacturer’s recommendations.
It’s normal for the pressure to increase slightly when your heating is running, as the water expands when heated.
For example, you might notice the pressure sitting at 1.2 bar when the system is cold and increasing when the heating comes on.
A small change is generally nothing to worry about. However, significant changes or pressure that regularly falls outside the recommended range should be investigated.
Always check your manufacturer’s guidance or ask a qualified engineer what pressure is correct for your particular system.
Why is my heat pump pressure too low?
If your pressure keeps dropping, there could be an underlying issue.
Some common causes include:
- A water leak: Even a small leak around pipework, radiators, valves or connections can cause the pressure to drop over time.
- Air in the heating system: Trapped air can affect circulation and may contribute to changes in system performance.
- Expansion vessel problems: If the expansion vessel isn’t working correctly, your system may struggle to maintain stable pressure.
- Pressure relief valve issues: A faulty or passing pressure relief valve can allow water to escape from the system.
If you find yourself regularly needing to top up the pressure, it’s important to establish why it’s dropping rather than continually adding more water.
Why is my heat pump pressure too high?
High pressure can be just as concerning as low pressure.
If your pressure is regularly rising above 2 bar, it’s worth keeping an eye on it and checking the recommended operating range for your system.
Possible causes include:
- An expansion vessel that isn’t functioning correctly.
- Too much water in the heating system.
- A faulty filling loop or filling valve allowing additional water into the system.
- Problems with the pressure relief valve.
If the pressure continues to rise, particularly towards the maximum operating limit, arrange for an engineer to investigate.
Don’t ignore a pressure reading that keeps increasing.
Why does my heat pump pressure keep going up and down?
It’s normal for pressure to fluctuate slightly as your heating system heats up and cools down.
However, if you’re noticing large fluctuations, or the pressure is constantly dropping and then increasing again, there may be an issue.
This could relate to the expansion vessel, air within the system or another problem with the heating circuit.
An engineer can check the system and establish whether the pressure changes are normal or a sign of a fault.
Can low or high pressure stop my heating from working?
Yes. If the system pressure falls too low, your heat pump may struggle to circulate water properly and could display a fault or stop operating.
Similarly, excessive pressure can cause the system’s safety mechanisms to operate, potentially resulting in water being discharged through the pressure relief valve.
If your heating has stopped working and you’ve noticed an unusual pressure reading, it’s worth having the system checked rather than repeatedly resetting it.
Can I adjust my heat pump pressure myself?
Some homeowners may be familiar with topping up a conventional boiler, but heat pump systems can have different configurations and requirements.
We recommend checking your manufacturer’s instructions before attempting any adjustments.
If you’re unsure how to adjust the pressure, or you notice it keeps changing, it’s best to leave it to a qualified engineer.
Avoid repeatedly topping up the system without understanding why the pressure is changing.
When should I call a heat pump engineer?
You should arrange a professional inspection if:
- Your pressure keeps dropping.
- Your pressure is regularly rising above 2 bar.
- You notice water leaking around pipework or components.
- Your heat pump keeps switching on and off.
- Your system is displaying a pressure-related error code.
- Your heating or hot water has stopped working.
- You regularly need to repressurise the system.
A diagnostic visit allows an engineer to investigate the cause rather than simply treating the symptoms.
Need your heat pump serviced?
Choose a one-off heat pump service or join our Annual Heat Pump Service Plan and we’ll take care of it each year.