Skip to content

Why Does My Heat Pump Keep Turning Off?

Have you noticed your heat pump switching itself off throughout the day?

Perhaps you’ve gone to check the heating and noticed the outdoor unit isn’t running. Or maybe your home isn’t getting as warm as it should, and you’re starting to wonder whether there’s something wrong.

 

Should a heat pump be left on all the time?

Generally, yes.

Heat pumps are designed to provide steady, consistent heating rather than heating your home in short bursts like you might be used to with a traditional boiler.

They’re usually most efficient when they’re allowed to run for longer periods at lower temperatures, maintaining a comfortable temperature throughout your home.

This is why we generally recommend leaving your heating enabled rather than constantly switching it on and off.

But there’s an important difference between leaving your heating enabled and expecting the outdoor unit to run continuously.

Your heat pump will automatically adjust its operation depending on the temperature outside, the temperature inside your home and how much heating is needed.

So, if your heat pump stops running because your home has reached the desired temperature, that’s perfectly normal.

 

Why does my heat pump keep turning off?

There are a few different reasons why your heat pump might be stopping throughout the day.

Some are completely normal parts of how the system works. Others might need a little more attention.

Here are some of the most common reasons.

1. Your home has reached the temperature you’ve set

This is probably the simplest explanation.

Your heat pump works alongside your thermostat to maintain the temperature you’ve selected.

Once your home reaches that temperature, the system may reduce its output or temporarily stop heating.

When the temperature drops and more heating is needed, it should start up again automatically.

So, if your heat pump stops occasionally but your home is staying comfortable, there’s usually no reason to worry.

We’ve explained this in more detail in our guide to weather compensation and getting your heat pump set up correctly.

2. Your heat pump is going through a defrost cycle

If you’ve noticed your heat pump stopping during colder weather, it could be carrying out an automatic defrost cycle.

Air source heat pumps take heat from the outside air. During colder and damp conditions, frost can build up on the outdoor unit.

To deal with this, the system periodically reverses its operation to remove the frost.

During a defrost cycle, you might notice:

  • The outdoor fan stops temporarily.
  • Heating output changes or pauses.
  • Steam appears from the outdoor unit.
  • Water drips from underneath the unit.

This is all part of normal operation.

However, if your unit is regularly covered in thick ice or doesn’t return to normal operation, it’s worth having it checked.

3. Your thermostat or heating controls aren’t set correctly

Sometimes the problem isn’t actually with the heat pump itself.

Your heating controls determine when your system needs to provide heating.

If your thermostat is positioned somewhere that gets warmer than the rest of your home, it might tell the heat pump to stop heating before other rooms have reached a comfortable temperature.

It’s also worth checking your heating schedule.

If your controls have been programmed to switch the heating off at certain times, your heat pump will follow those instructions.

If you’re unsure about your settings, it’s always best to speak to your installer or a heat pump specialist before making changes to the more advanced controls.

4. There’s a problem with water flow

Your heat pump relies on water circulating around your heating system to transfer heat into your home.

If that water isn’t flowing correctly, the system might struggle to operate as it should.

There are several possible reasons for this, including:

  • Low system pressure.
  • Restricted or dirty filters.
  • Air in the heating system.
  • A problem with the circulation pump.
  • Incorrectly adjusted or closed valves.

In some cases, the heat pump may shut down to protect itself.

These aren’t issues we’d recommend trying to fix yourself. An experienced heat pump engineer can investigate the water circuit and identify what’s causing the problem.

5. Your heat pump has developed a fault

If your heat pump keeps switching off unexpectedly, particularly when your home still needs heating, there could be an underlying fault.

You might notice:

  • An error code appearing on your controller.
  • The heat pump stopping without warning.
  • Your heating becoming unreliable.
  • Hot water taking longer than usual to heat up.
  • The system repeatedly switching on and off.

If this sounds familiar, it’s worth getting your system checked.

Make a note of any error codes or warning messages, as these can help an engineer understand what’s happening.

And don’t keep resetting the system if the same problem continues to come back.

 

When should I get my heat pump checked?

If your heat pump is stopping occasionally but your home is staying warm and there are no warning messages, it may simply be operating as intended.

However, we’d recommend getting it checked if:

  • Your heat pump keeps switching off unexpectedly.
  • Your home isn’t reaching the temperature you’ve set.
  • You’re regularly having problems with your heating or hot water.
  • Your system is displaying error codes.
  • Your heat pump is repeatedly switching on and off over short periods.

The sooner a problem is investigated, the better.

You don’t want to leave a small issue to develop into something more disruptive.

 

Need your heat pump serviced?

Choose a one-off heat pump service or join our Annual Heat Pump Service Plan and we’ll take care of it each year.

Book your next heat pump service from just £90.

Get in touch

We’ll get back to you within 24 hours.

Call us
0191 603 1999

Outside of office hours, please leave a voicemail, or use our contact form.

"*" indicates required fields

Name*
Untitled*