Skip to content

7 Things You Should Never Do to Your Heat Pump

Your air source heat pump works hard to keep your home warm and your hot water ready when you need it.

But while modern heat pumps are designed to operate reliably, the way you use and look after your system can make a difference.

The good news? You don’t need to be a heating engineer to look after your heat pump properly. Knowing what to avoid is a good place to start.

Here are seven things we’d recommend never doing to your heat pump.

1. Don’t keep resetting your heat pump when a fault appears

If your heat pump displays an error code, it’s tempting to try switching it off and back on again in the hope that the problem disappears.

Sometimes, a reset may be appropriate according to the manufacturer’s instructions. However, repeatedly resetting the system without understanding the cause isn’t a good idea.

If the same fault keeps returning, your heat pump may be telling you that something needs attention.

Ignoring the underlying issue could leave you without heating or hot water when you need it most.

The best thing to do is take a note of the error code and when it appeared. Check the manufacturer’s guidance and contact a qualified engineer if the fault persists.

A code can help an engineer narrow down the problem, so it’s useful information to have.

 

2. Don’t change settings you don’t understand

Heat pump controls can look complicated, especially if you’re unfamiliar with the system.

You might come across settings relating to heating temperatures, hot water, schedules and how the system responds to different conditions.

It can be tempting to start changing things until your home feels warmer or your bills look lower. But making several adjustments without understanding their purpose can make it harder to identify what’s working and what isn’t.

Some settings are also specific to the way your system was designed and installed.

Stick to the everyday controls you’re familiar with, such as your normal heating schedule and room temperature settings.

If you’re unsure about installer or advanced settings, ask a qualified heat pump engineer to explain what they do before making changes.

You shouldn’t have to guess your way around your heating system.

 

3. Don’t ignore a sudden change in your energy bills

Your heat pump’s electricity use can change throughout the year.

Colder weather, longer heating hours and increased hot water use can all affect how much energy your home needs.

However, if your electricity bills suddenly increase and you can’t explain why, it’s worth investigating rather than assuming it’s simply the weather.

A change in energy use doesn’t automatically mean your heat pump has a fault, but it can be a useful clue that something about the system or your home’s heating demand has changed.

Compare your energy use over similar periods where possible, rather than comparing a cold winter month with a mild summer month.

Think about whether your heating schedule, hot water use or household routine has changed.

If the increase is unexpected or continues without a clear explanation, a specialist can help assess whether the system is operating as it should.

 

4. Don’t attempt electrical or refrigerant repairs yourself

If your heat pump stops working, you might be tempted to take a look inside the unit or try to repair a component yourself.

We understand wanting to get things sorted quickly, especially if you’ve got no heating or hot water.

But heat pumps contain electrical components and a refrigerant circuit that require the appropriate knowledge, training and equipment to work on safely.

Attempting repairs without the correct qualifications can put you at risk, damage the equipment and potentially make the original problem worse.

Leave internal repairs, electrical work and refrigerant-related work to appropriately qualified professionals.

You can still help by recording any fault codes, describing what happened before the problem started and taking a photo of the display if it’s safe to do so.

That information can help your engineer understand the issue before arriving.

 

5. Don’t assume your heat pump never needs attention just because it’s still working

Your heat pump might appear to be running perfectly well, but that doesn’t mean every component has been checked or that there are no developing issues.

Some problems can go unnoticed until they start affecting heating performance or lead to a breakdown.

It’s also easy to forget about maintenance when your heating system is tucked away outside and you rarely need to think about it.

But waiting until something stops working isn’t always the best approach.

Keep track of when your heat pump is due its next service.

A professional service allows an engineer to assess the condition of the system, carry out the relevant checks and flag anything that needs further attention.

 

6. Don’t ignore recurring problems because your heating still works

Perhaps your heat pump occasionally struggles to reach the temperature you’ve set. Maybe you keep seeing the same warning, or your hot water isn’t behaving as it normally does.

It’s easy to put these things down to a one-off issue, particularly if everything seems to return to normal afterwards.

However, recurring problems are worth paying attention to.

Your heating system doesn’t need to stop working completely before an issue deserves investigation.

Keep a note of what happens, how often it occurs and whether anything seems to trigger it.

For example, does the issue happen at particular times of day? Does it occur during hot water heating? Is there a recurring error code?

These details can help an engineer investigate the cause rather than simply treating the symptoms.

 

7. Don’t assume all heat pumps need exactly the same care

Not all heat pumps are the same.

Different manufacturers and models can have different controls, maintenance requirements and operating instructions.

What applies to one system might not be appropriate for another, particularly if your home has a hybrid setup that combines a heat pump with a boiler.

Following generic advice from an online forum or applying settings recommended for a different model can lead to confusion and, in some cases, poor operation.

Keep your system’s documentation somewhere accessible and follow the manufacturer’s recommendations for your particular model.

If you’re unsure about a setting, a warning or the maintenance your system needs, ask an engineer familiar with your equipment.

 

NEED YOUR HEAT PUMP SERVICED?

Choose a one-off heat pump service or join our Annual Heat Pump Service Plan and we’ll take care of it each year.

Book your next heat pump service from just £90.

Get in touch

We’ll get back to you within 24 hours.

Call us
0191 603 1999

Outside of office hours, please leave a voicemail, or use our contact form.

"*" indicates required fields

Name*
Untitled*